Search found 36 matches

by me68
Sun, 27 Sep 2015, 10:00
Forum: Mitsubishi
Topic: Is the i-MiEV rear engined?
Replies: 5
Views: 945

Is the i-MiEV rear engined?

Hello! If you follow mikeduftie's definition it is mid engined. Have a look to the car: http://www.arpem.com/coches/coches/mitsubishi/i-miev/fotos/2010/mitsubishi-i-miev-5p-mecanica.jpg The motor itself is in front of the axle, the gearbox or better the differential is directly in line with the axle...
by me68
Tue, 01 Sep 2015, 23:45
Forum: Mitsubishi
Topic: Citroen C-Zero: cell replacement
Replies: 3
Views: 940

Citroen C-Zero: cell replacement

Hello,

i have changed now the defect cell of our Citroen C-Zero.

Have a look to YouTube Video - Citroen C-Zero - Cell replacement

Please have a look to the whole story at Mitsubishi i-MiEV Forum

Martin :-)
by me68
Sun, 26 Apr 2015, 10:31
Forum: Mitsubishi
Topic: Malm, 2011 i-MiEV, Portugal
Replies: 128
Views: 10445

Malm, 2011 i-MiEV, Portugal

If you look to my recording at http://www.spritmonitor.de/en/detail/532466.html you see my normal driving style. Most km are commuting 20km to the office and 20km back to home on country roads. These values are measured from wall. So the allover average from battery is 14.588Wh/17.500Wh*15,1kWh/100k...
by me68
Fri, 24 Apr 2015, 22:26
Forum: Mitsubishi
Topic: Malm, 2011 i-MiEV, Portugal
Replies: 128
Views: 10445

Malm, 2011 i-MiEV, Portugal

Recharging tooks 17.500Wh, measured via dedicated Ferraris-counter. So with 14.588Wh used, i have 20% loose at charging or 83% efficiency for the whole batterysystem with charging-unit. Regarding battery degration: it seems to me, that Mitsubishi follows the strategy to give us always the same batte...
by me68
Fri, 24 Apr 2015, 13:14
Forum: Mitsubishi
Topic: Malm, 2011 i-MiEV, Portugal
Replies: 128
Views: 10445

Malm, 2011 i-MiEV, Portugal

Hello! Last year i did a trip around Neusiedlersee, Burgenland, Austria - see one caniOn screenshot above. To get a feeling for battery degration, i did this trip today again. Battery temperature was today a little bit higher as last year (2014: 19,1°C -> 21,3°C, 2015: 23,4°C -> 25,8°C). I discharge...
by me68
Sun, 05 Apr 2015, 07:52
Forum: Mitsubishi
Topic: Malm, 2011 i-MiEV, Portugal
Replies: 128
Views: 10445

Malm, 2011 i-MiEV, Portugal

Hello Malm! Last year i have done this: https://lh3.googleusercontent.com/-EWul6xea7sY/U0Wp8JOHDVI/AAAAAAAAAlA/5EcjDVnE9-E/w1278-h702-no/pict_140409_220653.png So i used 15.328Wh - 760Wh = 14.568Wh (98% DoD) ... 100%DoD should be then 14.865Wh real useable capacity. I'll repeat this trip this year. ...
by me68
Sat, 04 Apr 2015, 09:49
Forum: Mitsubishi
Topic: Malm, 2011 i-MiEV, Portugal
Replies: 128
Views: 10445

Malm, 2011 i-MiEV, Portugal

Hello Malm!

Could you please show us a screenshot from Panel Trip Timer from this trip to see Wh Out & Wh reg also?

Martin
by me68
Fri, 25 Jul 2014, 18:34
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

Interesting comparison!

Temperature is the magic word.


Martin
by me68
Sat, 19 Jul 2014, 01:30
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

I will take the same 5% SOC test from 3-4 bars and then do the same test at 14-15 bars this should give some voltage spread and see what numbers I get. Hello Kurt! The bars form the dashboard represent different Wh. So this is not an accurate method, also working with small ranges like 5% and inter...
by me68
Fri, 18 Jul 2014, 21:49
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

I also think 5%SoC charging/using is not suitable to calc whole battery capacity, because it's unknown to us, how SoC is calculated and if this is linear over the whole range. Why not using f.e. 90%DOD or even more? I have done this twice with 98%DOD - see elweb.info Thread . I get out first time 14...
by me68
Tue, 15 Jul 2014, 21:26
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

Hi kurt I have used my own mx, acmotor's mx and batman dongles. Both my mx and acmotor's mx had dropoff issues if BT Audio was on. This is with nexus 7 gen 1 tablet. Hmmm that reminds me. I should probably do a latest mx test with other BT devices turned off Somehow martin has been lucky with his e...
by me68
Fri, 11 Jul 2014, 20:35
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

one thing that could be an issue with the OBDlink MX is its finding an interference free bluetooth channel. today the Nexux 7 tablet kept going to 0 shortly after connecting at 400fps. I re-paired the tablet and now it is more stable for now. the batman dongle doesn't seem to have this issue. perha...
by me68
Wed, 02 Jul 2014, 04:16
Forum: Mitsubishi
Topic: THE BEST 0.0% SOC EVER
Replies: 21
Views: 2042

THE BEST 0.0% SOC EVER

Hello! If you touch the left block, beginning with "RR", ending with "Wh/km", you'll get a screenshot file in /sdcard/bt_can. filename starting with pict_ You can also define a screen capture intervall (f.e. every 10 secs) with such files. Then you can easily make a fast motion video f.e. from panel...
by me68
Mon, 30 Jun 2014, 22:05
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

Hello Kurt! The heater and airconditioner do not use constant amps. For me, it's only possible to calculate charging efficency comparing energy out from battery, measured with caniOn and energy in, measured with a energymeter at your plug. I use a Ferraris-energymeter in my electrical cabinet. Have ...
by me68
Mon, 30 Jun 2014, 20:50
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

5000whr out but 5400whr in . There could be a number of reasons for the discrepancy. Hello Kurt! Don't forget cell chemistry has also an efficiency of maybe 90%. So you lost energy on loading cells - this energy get in heating the cell during loading. The other point is cell balancing, but i do not...
by me68
Mon, 30 Jun 2014, 10:44
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

Ok - fine! Optional screenshots from Batt Status & Batt Temp from the beginning of the trip and also from the end of the trip. Also Amps History and Speed History from the end of the trip. So we have a close look to what's happened.

Martin :-)
by me68
Mon, 30 Jun 2014, 10:16
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

Malm wrote: So me68, do you me to go to something like 0% of SoC and then see what it charges until its full? That's what you want?


No, not to 0%, only near to. I do it from 100 to 2%.

I'm interested in the capacity you get out. So do a long trip please and show us a screenshot from Trip Timer.

Martin
by me68
Mon, 30 Jun 2014, 08:34
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

Please do i test, as i have done. So we can see your battery capacity.

Martin
by me68
Mon, 30 Jun 2014, 06:29
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

For me, only batterie capacity out is interesting. This is the reference of battery condition. Input is not so interesting, because ist's more efficient to load with 230V/16A as with 110V/8A. So you have to check efficiency of charger also. That's interesting for the money you have to pay for drivei...
by me68
Sat, 28 Jun 2014, 20:13
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

Until last summer, without canion, I didn't take to much care with hot temperatures Hello! I suspect some cells in your car are degrated much more then the others. So SoC calc/estimate is difficult at all. It's more difficult or impossible if some cells are in poor condition. It's not clear to me h...
by me68
Sat, 28 Jun 2014, 20:05
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

Interesting did you drive the car to 0% and read 15kwh on Canion or just use calculation with some % soc in the battery to get 15kwh. Hello Kurt! I drove it down from 100%SoC to 2%SoC both times with one trip - see screenshots in thread in german forum and calculated to 100%DOD. I have only done th...
by me68
Fri, 27 Jun 2014, 20:33
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

I checked this out for the C-Zero in April. I got 14.865Wh all over with an avg temp batt of 21,3°C - see also http://67183441.foren.mysnip.de/read.ph ... msg-395517

A second time some weeks later a got out 15.000Wh.

Martin
by me68
Tue, 24 Jun 2014, 19:26
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

I'll not confirm. Do you have a screenshot?

Martin
by me68
Mon, 23 Jun 2014, 23:00
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

acmotor wrote: So what we need is a mitsi battery engineer on the research team


I'm also dreaming from that to read some more data from the can-bus! Sending mitsu your btcan.db will be a better idea, so all data can be analysed by mitsu.

Martin
by me68
Tue, 03 Jun 2014, 18:52
Forum: Mitsubishi
Topic: Imiev measured data
Replies: 506
Views: 43483

Imiev measured data

Could you please send us your btcan.db from renamed bt_can directory?

To e-mail-address at Google Play Store - caniOn

Martin