AEVA Homepage
Forum Home Forum Home > Technical Discussion > Electric motors and controllers
  Active Topics Active Topics
  FAQ FAQ  Forum Search   Register Register  Login Login

Dead Curtis 1231C-8601 or Schematic
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
a4x4kiwi View Drop Down
AEVA Member
AEVA Member
Avatar

Joined: 03 January 2008
Location: Australia
Online Status: Offline
Posts: 581 		  Quote a4x4kiwi Quote  Post ReplyReply Direct Link To This Post Topic: Dead Curtis 1231C-8601 or Schematic
    Posted: 16 January 2010 at 7:29am
Hi Guys,
I am fixing up a Curtis with some fried components on the logic board and need to determine the values. Does anyone have a fried controller I can beg, borrow or steel I can use to compare?

Or even better, an accurate schematic for this model?

Web searches have not been successful unfortunately.

Thanks,
Mal.
Silicon is just sand with attitude.
Blog:    http://a4x4kiwi.blogspot.com
EVAlbum: http://www.evalbum.com/1687
Back to Top
Electrocycle View Drop Down
Senior Member
Senior Member
Avatar

Joined: 19 October 2008
Location: Sydney
Online Status: Offline
Posts: 849 		  Quote Electrocycle Quote  Post ReplyReply Direct Link To This Post Posted: 16 January 2010 at 8:25am
I have a few bits that could be helpful :)
Will dig them out
The Engine Whisperer - fixer of things
Back to Top
a4x4kiwi View Drop Down
AEVA Member
AEVA Member
Avatar

Joined: 03 January 2008
Location: Australia
Online Status: Offline
Posts: 581 		  Quote a4x4kiwi Quote  Post ReplyReply Direct Link To This Post Posted: 16 January 2010 at 10:43am
Thanks. Let me know when they are dug and I will drop over.
Silicon is just sand with attitude.
Blog:    http://a4x4kiwi.blogspot.com
EVAlbum: http://www.evalbum.com/1687
Back to Top
 Post Reply Post Reply

Forum Jump Forum Home Forum Permissions View Drop Down

Bulletin Board Software by Web Wiz Forums® version 9.07
Copyright ©2001-2008 Web Wiz

This page was generated in 0.105 seconds.